tube, tubing manufacturer, tubes, tubings wholesaler and design--China JingPin machine Co., Ltd.

Founded in 1994, China JingPin machine Co., Ltd. produces tube, tubing and design tubes, tubings ten more kinds of products such as Valve, Pipe, Hose, Fitting, Flange and non-standard valve etc. We have 300 equipment such as modern machinery processing center, digital control machine tool, and general machine tool, etc. and has the oversize vertical machine tool with 3.5 meters processing diameters, and has some special equipment for metal material physics and chemistry test, mechanical perform dynam test, ultrasonic thickness test, rigidity test, non-breaking detecting, plasma repair welding, metal hot-treatment, safety valve hot-state, cold-state full-performance test center, and spring strength test, etc. Our OEM tube, tubing products sell well in overseas markets such as Europe(UK, France, Germany, Italy), Amercia, Japan, the United States, and South Asia."

Our tube products: inner tube, stainless steel tube, test tube, water tube, feeding tube, float tube, vacuum tube, copper tube, plastic tube, groove tube, tube bender, pitot tube, aluminum tube, fluorescent tube, mailing tube, rubber tubing, shrink tubing, poly tube, pex tubing, pvc tubing

1/8 to 1 in. OD #04/304L and 316/316L STMA213*/A269 (*nominal wall thickness, not minimum wall thickness). Available chemically cleaned and passivated to comply with ASTM G-93 and CGA G4.1
Available thermocouple cleaned to meet ASTM A632-S3. Until now mountain unicyclists had to put up with standard 24" inner tubes in their 24 x 3" tyres. Running a standard 24" inner means that the rubber of the inner tube is stretched paper thin and is vulnerable to pinch flats. This new 24 x 3" inner tube is correctly matched to the tyre's size, and fixes this problem. You can ride without fear of pinch-flatting any more! Ease of design exploration is illustrated by changing the density of the inner tube and showing the position of the waterline changes automatically after rerunning the feasibility study and regenerating. Practical applications of this example extend to the design of floats, buoys, or watercraft.

10 Stainless Steel Tubes (Backstems) for Tattoo Machine. Tube Length is 3 Inches. Buy with Confidence! These are available a range of four sizes, i.e. 0.50m, 0.85m, 1.15m and 1.55m high. All have a diameter of 76mm (3"). stainless steel tubing is crafted in the highest industry standards and is available for a wide range of standard or custom ornamental and structural applications.
Type: austenitic. Process method: cold drawn and cold rolled. Outside diameter: from 6 to 650mm
Thickness: Schdeule 5S, 10S ,40S , 80S , 160 , XXS. Grades: 321, 304, 304L, 316, 316L, 321, 310S, 317L, 347, 347H, 304H, 321H, 304LN. Standards: ASTM (ASME), A213/A213M (SA213/SA213M), A269/A269M, A312/A312M (SA312/SA312M), A1016/A1016M. pickled and annealed. Medium frequency induction furnace (made in USA): 2 x 30 tons. Electric arc furnace: 1 x 30 tons. Argon-oxygen decarbonization: 2 x 30 tons. piercing lines: 4 lines (diameter: from 50 to 240mm). Cold drawing lines: 18 lines. Cold rolling lines: 6 lines.